ULTIMAKER 3 EXTENDED

image15

Printer and Printing Properties

 

 

Technology                                             Fused Filament Fabrication


Print head                                              Dual nozzle, with lifting mechanism on 2nd              

                                                              nozzle.


Build volume                                          Easily swappable printcores.


Filament diameter                                  2.85 mm


Layer resolution                                     0.4mm nozzle: 20 - 200 micron


Step accuracy X,Y, Z                              12.5, 12.5, 2.5 micron


Print head travel speed                         30 - 300 mm/s


Material flow speed                               0.40: up to 16mm3/s


Build plate                                             Heated glass bed


Material types                                       PLA, PVA, ABS, CPE, Nylon


Nozzle diameter                                     0.4mm


Nozzle temperature                               180 - 280 oC


Build plate temperature                        20 - 100 oC


Nozzle heat up time                               < 2 min


Build plate heat up time                        < 4 min (20 - > 60 oC)


Average operation noise                        50 dBA


Nozzle replacement                               Easily swappable printcores


Filament storage                                   Open, reel holder incl guide for 2 spools of       

                                                              750g


Connectivity                                          Wifi, ethernet, stand alone via USB-drive


Bed levelling                                          Active leveling


Camera                                                  Yes

Physical dimensions

Printer outer dimensions (incl                 49,3 x 33,8 x 68,8 cm 

bowden tube and spoolholder)


Printer outer dimensions (excl                35,7 x 33,8 x 68,8 cm 

bowden tube and spoolholder)


Power requirements

Input                                                        100 - 240V                    

                                                                4A, 50-60Hz

                                                                221 W max 

              

Output                                                     24 V DC, 9.2 A


Ambient conditions

Ambient operating conditions                     15 - 32 oC, 10 - 90% RH non condensing

Software

Supplied software                                    Cura 2 - Official Ultimaker Software

Supported OS                                           Windows, Mac, Linux

File types

STL, OBJ, 3MF 

Ultimaker 3 Extende

Check out this great video